High Efficiency Boilers to Reduce CO2 Emissions Thanks to Part L

Written by Tal Potishman

Wednesday, 12 November 2008

by TalPotishman

Part L was introduced as part of the 2005 Building Regulations and it set a new standard with regards to energy efficiency. It called for all new boilers installed or replaced to meet the required standards for achieving high efficiency rating. Boilers such as condensing and combination (also known as 'combi') boilers which use extra large heat exchanger or a secondary heat exchanger qualify for this requirement. By extracting the heat from previously expelled gases, the high efficiency boilers reduce the required fuel to generate the same about of heat.

The new requirements are much more demanding than previously in terms of the professional level of the system designer, the installer and the service engineer. The new systems are more integrated than old systems as all components are specifically designed to provide the right output (in terms of power) or demand the right input (such as in the case of heating controls). The engineer has to have good understanding in order to maximize the efficiency of the system.

Research shows that since the introduction of the new Part L, the domestic heating industry has made a major reduction in the amount of carbon emissions generated every year. Recent analysis conducted in the industry indicates that savings of around 2.4 million tonnes of carbon have been made since the new Building Regulations have been introduced. Furthermore, the analysis shows that had Part L not been introduced and with the industry relying on SEDBUK D rated systems, the amount of carbon emissions would have increased by over one million tonnes since 2005.

At current levels there is still large potential for reducing the carbon emissions generated by the domestic boilers in the UK. There are around four million old boilers which are significantly less efficient than modern SEDBUK A rated boilers. Replacing such old boilers with an A rated boiler can reduce carbon emissions by around 30%. Each home in the UK produces an average of 5 tonnes of CO2 per annum. Across the whole population, domestic heating accounts for around 16% of the UK's CO2 emissions.

The government is attempting to encourage carbon reduction within the domestic heating market. It has introduced zero stamp duty on carbon neutral homes and requires all home sellers to produce a home information pack which includes a detailed energy performance certificate. However, the stamp duty waiver will not apply to the vast majority of the old housing stock which is where most of the carbon savings should be made. The shortcoming of the home information pack is that it only applies when the property is put for sale, and does not encourage improving the heating efficiency at other times.

There are several alternatives to adopt that can further reduce the carbon emission resulting from domestic heating within the UK. The most effective among them is the application of renewable energy technologies, such as solar water heating. If just 10% of the new homes that the government plans to build between now and 2020 adopt such technologies, it is estimated that around 150,000 tonnes of carbon emissions would be cut on an annual basis.

There are several options for the government to reduce the carbon emissions from the UK housing stock and meet the challenging targets it set. It is important to note that any relevant plan would be met with a prepared and professional group of plumbing and heating companies that are investing in professional development and staff training for the new technologies.

Article Author:

Tal Potishman, editor of Heating Central, writes articles about plumbers, central heating, London boiler, underfloor heating and solar thermal. He specializes in helping save money by advising on efficient heating.

Comments

Add New

RSS

Write comment

Name:

Email:

Website:

Title:

UBBCode: